The disc grain making machine- a kind of sand maker, adopts an overall circular structure, the granulation rate may reach above 93%. There are three discharge ports, which can greatly reduce labor intensity and improve the work efficiency. The reducer and motor were driven by a flexible belt to decline impact force and prolong the service life. Several steel plates are installed on the bottom of disc to strength the machine without deformation. Thicker, heavier, solid base without anchor bolts can protect the machine operate smoothly. The master gear service life can be extended more than double after high-frequency quenching. The granulator velum line has the high strength glass steel which is antiseptic and durable.As a fine material feeder, it is suitable for non-cohesive materials like coal powder, cement, clinker, limestone, shale, gangue and clay. It is widely used in gold Concentrator, coal mine, chemical plant, construction and foundry for quantitative and even feeding.
Disk grain making machine is widely used in gold concentrator, coal mine, chemical plant, construction and foundry for quantitative and even feeding.
Disk grain making machine has obvious impact effect during the operation, and it can impact ores repeatedly driven by the transmission of working parts. So the impact strength of the machine will be the first problem we must consider. For the different forcing methods, the machine must be treated differently, and we must do rational analysis on the basis of clear distinction. In general the forcing method of disk grain making machine can be divided into press, split, broken, grinding peel and impact. Since the forcing method is different, the ore strength also has difference in the operating.
Characteristics
1. Reasonable structure, less weight, low height; easier to layout and suitable for the transformation of the old plant;
2. The dip angle can be adjusted easily.
3. The special unpowered scraper combination structure can reduce the power consumption.
4. The tape is made up of disc and plate section. The plate section can move up and down along the plate body. The flange at the end of plate can protect the ball-shape material without tear and damage.
5. The new dredging design (unpowered scrapers clean the side and bottom, the cleaning scraper cleans the corner) has good cleaning performance with the unique processing technology. The 90% ball-shape material diameter can reach 3-5mm.
Based on the different of material mechanical properties, there are kinds of disk grain making machines designed according to the different nature of broken objects. The advantage of this is we can improve the efficiency of mining machinery in the real production and get the optimal crushing effect to obtain the best benefits.

上一篇： The analysis of vibrating screen at home in 2012 下一篇： Merger is an angle or devil for machinery industry