Details on Delivery Process of Hydraulic Cylinder
已有 133 次阅读 2012-06-20 17:34Pulley device is used for the installation and maintenance of a tank cylinder
with seven pairs of roller and a pressure roller in the slide below. Pressure
roller can support the rail and car, press the slide rails maintain balance when
run to the left. the hydraulic cylinder delivery process is as follows:
The
modern economic development is inseparable from science and technology. The
development of mining machinery are closely related to the progress of modern
science and technology and the overall industrial level, in particular, is
closely linked with the development of the science of mechanical engineering and
mining disciplines. As a branch of mechanical engineering science, the
development of mining machinery should follow the general trend of digitization,
intellectualization, precision, miniaturization, life and ecology, meanwhile,
combining with its own characteristics to develop digital, intelligent,
ecological and pleasant mining machinery. On this basis, Hongxing machine, which
is specialized in sand maker and ball mill, develops its own development
strategies according to its own development. 1. first car from the c position
shift military position car fixed, and then use the baffle. The purpose in doing
so, make the slide move to the left from the right side of the first roller, car
right side of the wheel to enter the slide of the second roller right side of
the left sorrowful, ensure that the extravagant action smooth.
2. The slide
from the c position moved to the r-bit and pin rail mounting bracket. At this
point the car into d.
3. When the board removed, the car moved to 0, and then
fixed baffle.
4. using crane lift cylinder ear, and put hydraulic cylinder on
the small car.
5. Shift the car back to the d and fixed rail will shift back
to c, then the car moved back to b, the hydraulic cylinder hanging out repairs.
Returned to hydraulic cylinder operation as above. Move the slide or a small
car, you can use artificial, can also be set on both sides of the pulley by
crane mobile.
The standard cone crusher
structure. The rack is the entire crusher, all parts are mounted on the rack, it
was four bolt fixed on the basis of The rib plate is connected to rack center
sleeve and shaft set of simple and rack by rack center set of simple
pressurestraight bushing. Direct the Village applied bronze material, can also
be used nylon orbabbitt material. In order to prevent straight upward, making
two gaps in the straight bushing catchy opening, and loading it down.
Magnetic separator : http://www.china-crusher.com/magnetic-separator5.html
Screw classifier : http://www.mine-crusher.com/classifier.htm
上一篇: Role of coal mining plays in ball mill development 下一篇: The value of family affection
发表评论 评论 (0 个评论)