When the roll crusher
is used to crush the materials, the surface of the roller will be worn. As a
result, the materials must be uniformly fed into the crusher machine
along the direction of the length of the roller. If the material feeding is not
even, there will be annular grooves on the surface of the roller, which will
have some impact on the normal work of the crusher machine. In addition, the
particle size of the products is not even. During the feeding process, the
feeder should continuously feed the materials. In addition, the length should be
also consistent with the length of the roller.
When the roll crusher is used
to crush the materials on the surface of the roll, the surface of the roller
will be worn gradually. Therefore, the surface of the roller should be required
and maintained frequently. There is grinding wheel installed on the rack of the
gloss roll crusher. When there are pits or grooves on the roller surface on the
machine, you can require the machine without disassembling the surface of the
roller on the machine. The surfacing device is necessary for the crusher
machine. Some of the gloss roller
crusher has the roller automatically axially reciprocating movement of the
device, which can make the attrition of the roll become more evenly.
When the
teeth of the crusher machine are grinded to a certain extent, periodical
replacement and require is very necessary, which can avoid the unevenness of the
particle size of the materials, increase of the power consumption and reduction
of the production rate. The attrition of the surface may make the discharging
inlet increase. Therefore, the moving roller should be adjusted. During the
adjustment process, you should note that the two rollers should be kept balance.
The moving roller is installed on the rocker arm or the double-roller crusher
with the hydraulic compensation device. When the moving roller moves, the axis
of the two rollers should be kept balance automatically. In order to ensure the
normal work of the roll crusher, frequently checking the lubrication situation
of the bearing is also necessary.
We provide Professional technology, excellent product quality and intimate after-sales service when you purchase Ore beneficiation, Screw classifiers, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.
上一篇: Exploitation and Utilization of New Energy Resources 下一篇: Design for Gap of Hammer Screen of the Hammer Crusher
发表评论 评论 (0 个评论)