Focusing on the injection of low carbon environmental philosophy in the early stage of design and manufacturing can protect our production environment, develop and manufacture high-degree green products, effectively prevent trade outlet obstruction caused by technical factors.
Low carbon and environmental protection in jaw crusher industry is one of the inevitable development trends of construction machinery industry, it is also an inevitable choice in the future, and the one who prefer to focus on green element injection will be the first to capture the market.
1. The composition of the materials to be crushed. The more the sand content and powder content of the materials, the easier for the materials to adhere to the normal input of the conveyor in the process of the delivery of material. The workload of the crusher increases, however, the output does not. Therefore, the workers should understand the fineness of the raw materials and reduce the sand content and powder content of the materials if necessary.
2. The nature of the materials, including the hardness, the composition, the viscosity and the moisture content of the raw materials, the particle size and fineness the products require, and so on. The higher the hardness of the raw materials, the more difficult of the crushing work. The crushing ability lowers and the crushing work progress slows down. The longer the raw materials stay inside the machine, the higher the wear and tear of equipment. Therefore, relatively speaking, the crushing efficiency of materials with low hardness is higher than the materials with great hardness, with the yield of the former is also higher. In the crushing production line, if the production materials are uncertain, the workers should try to choose those raw materials with middle hardness, which can improve the crushing progress and product yield in an easier way.
3. The moister content of the materials also affects the productivity of the compound crusher. When the materials contain large amount of water, they are easy to form the adhesion phenomenon in the crusher, causing obstruction in the process of feeding and nesting and reducing the crushing capacity. As for the materials with high moister content, the workers could take certain measures to control the water content. For example, they can use the dryer or sunshine to reduce the moister content of the material, and then carry crushing operations.

上一篇： Care is always taken when building up surge piles 下一篇： If life is a game how would you play this game?