Jaw crusher is mainly used for crushing various ores and large materials with
compression strength not more than 320Mpa into medium-sized grains;and is widely
applied in mine, metallurgy, construction, road, railway, water conservancy,
chemical industry, refractory material and ceramic etc.
Working Principle of
Jaw Crusher
This crusher adopts the electric motor as the power. The
eccentric shaft is resolved by an electric motor through v-belts. It causes the
swing jaw following the pre-concerted path to crush the feeding material. Thus
the material will be crushed in the crushing chamber which is composed of the
stationary jaw plate, swing jaw plate and the liner plate. The material is
discharged from the lower part of machine that is what you want.
Please
carefully examine the fasteners, especially lubrication components and bolts,
before the machine is started. Enough oil must be needed on each lubrication
component. Fasten the loose bolts, clear the crushing cavity, and then start the
machine. During the normal operation, even material feeding is important.
Insufficient load or over load is not allowed. Moving jaw plate, fixed jaw
plate, side guard plate and roof plate are wearing parts, and much attention
should be paid to them.
Again, jaw crusher impact load bearing on the babbitt
lining, duration of work for about two years or so, the deadline, you will need
to re-cast. If the eccentric shaft and bearings, spindle and bearing wear, the
tip clearance is 1.5 times larger than the original assembly gap, the need to
increase the pad adjustment or replacement; oil ditch wear of 1.5 mm, oil groove
and adjustments should be re-opened. The gap between the connecting rod head
cover and the eccentric shaft, wear and tear is greater than 1.5 times the
assembly gap, also need to add a pad to adjust or replace. Babbitt bearing on
deep peel or larger abrasions should be re-cast. Bearing quality processed the
following requirement: babbitt surface should be uniform in color, luster,
silver-white; babbitt surface layer should not be ash, cracks, sand holes,
shrinkage and peel phenomenon.
As a leading manufacturer of jaw crusher as
well as the complete set of crushing and screening equipment in Central China,
we have produced PE series jaw crusher based on many years of research and
integrated with successful experience of the same product at home and
aboard.
With its high quality products such as Hammer crusher, Mobile impact crusher, Magnetic separator, Sand maker, Vibrating screen, Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.
上一篇: Care is always taken when building up surge piles 下一篇: The influence of Lining board and ore
发表评论 评论 (0 个评论)