Stone manufacturer before purchase of crushing equipment to understand clearly the specific areas of applications of various crushers, investment projects according to their own roads, buildings, chemical, mining, and select the most appropriate equipment.
This hammer crusher is applicable for both dry and wet crushing. Hammer crusher is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%.
The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess.
In a number of broken equipment, hammer crusher are the most common type, has an important contribution to the development of mining enterprises. Hammer crusher has broken than large, the average nesting size, low power consumption strengths. Old-fashioned hammer crusher below the grate, grate bars prone to clogging material, so inappropriate to be used to crushing humidity and clay-containing materials. The Xinxiang full independent design and production of heavy-duty single-stage hammer crusher view of the above shortcomings, remove the old-fashioned hammer to break the grate, so to avoid clogging of the discharge port, increase the feeding amount of the finished product, increased the yield.
Heavy-duty single-stage hammer crusher hammer in two ways: high manganese steel and bimetallic composite. These two hammerhead life by 3-6 times, manufacturers can choose the right according to the material hardness the hammer.
After so many years of development, details of the heavy hammer crusher parts are the details of technical improvements. But still there are still noisy shortcomings, The Xinxiang full Mine Equipment Co., Ltd. is trying to seek a breakthrough in this regard. With its high quality products such as Sand washing plant、Dryer machine、Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.

上一篇： Care is always taken when building up surge piles 下一篇： The base of crusher manufactures is quality